 |
| The product based on 2PFG1169\08.2007 is applicable for flexible cables (wires) with single conductor used at the DV side of photovoltaic system with the maximum allowable DC voltage as 1.8KV (conductor-to-conductor, non-earthed system). The product is suitable for the use under Class II security level with the maximum ambient temperature for running cables up to 90c, and many cables can be co-used in parallel.<BR> |
|
|
|
|
| The product is suitable for buried cables under the moist circumstance with abundant groundwater or water tree growth inhibiting and safely and reliably operating transmission and distribution lines of rated voltages of 3.6/6-26/35KV. <BR> |
|
|
|
|
| The product is mainly applied to the electricity supply lines of fire lifts, fire pumps, fire alarm, smoke extraction system, emergency lighting, fire danger zone, high-temperature occasions and facilities with special safety requirements in fire-fighting system of large urban high-rise buildings, entertainment locations as well as many construction projects requiring high-quality and high-security. And the main purpose is to achieve security without cutting off power supply in case of fire.<BR> |
|
|
|
|
| It is applied to transport and distribute electricity line inside power station. The transport voltage is form 1KV to 750KV, and it is specially applied to expanding line and aging line reconstruction.<BR> |
|
|
|
|
| It is applied to transport and distribute electricity line inside power station. The transport voltage is form 1KV to 750KV, and it is specially applied to expanding line and aging line reconstruction.<BR> |
|
|
|
|
| The Product is suitable for use in power transmission and distribution lines with power-frequency between 50-60 Hz and 127/220KV of rated voltage for electrical energy distribution and transmission.</P><P> |
|
|
|
|
| The Product is suitable for use in power transmission and distribution lines with power-frequency between 50-60 Hz and 127/220KV of rated voltage for electrical energy distribution and transmission.</P><P> |
|
|
|
|
| The product is suitable for all kinds of shipboards and over-water buildings like petrol platform at sea. The cable can be also used to connect shipboard common instrument and control equipment.</P><P> </P><P> |
|
|
|
|
| The product is suitable for power transmission and distribution lines with rated voltage of 12/20KV and 18/20KV for electrical energy distribution and transmission.<BR> |
|
|
|
|
| The product is manufactured according to the standards of GB12527-90 “Aerial Insulated Cables of Rated Voltages Below and Including 1KV”, IEC60502 “Extruded Solid Insulated Power Cables for Rated Voltages from 1KV to 30KV and Appendix”.<BR> |
|
|
|
|
| The heat-resistant, halogen-free, flame-retardant and environmental protection power cable is applicable to the transmission of power under the conditions of long-term work temperature at 90 degrees centigrade for conductor and long-term aging temperature below and including 180 degrees centigrade for sheath.<BR> |
|
|
|
|
| The flame-retardant and fire-resistant power cable is applicable to long-term working temperature at 90 degrees centigrade for conductor.<BR> |
|
|
|
|
| GB/T1179-1999 round wire concentric stranded aerial conductors</P><P> GB/T1179-83 aluminum stranded conductor and steel-reinforced aluminum stranded conductor<BR> |
|
|
|
|
| The product is manufactured according to Q/320282DCE010-1999 “PVC Insulated Nylon Sheath and Cable with Rated Voltage Below and Including 450/750” or JB/T10261-2001 as well as IEC standard suggested by International Electrotechnical Commission, German standard and American standard as per users’ requirements.<BR> |
|
|
|
|
| The product is manufactured according to standards of Japanese Electric Wire Industry Association JCS376-1992 “Band Branch Cable” and GB12706-91 “Plastic Insulated Power Cable with Copper or Aluminum Conductor below 35kV (including 35kV) of Rated Voltage”.<BR> |
|
|
|
|
